Crochet Rainbow Bee Pattern Free Amigurumi With Striped Plush Body
Gardeners who grow their own herbs have a natural home for the crochet rainbow bee amigurumi, right beside the pots on a sunny kitchen table. To brighten a bee themed birthday table, set a plush striped bee on its side among the cupcakes and party favours.
Every stripe you finish on the Crochet Rainbow Bee Amigurumi feels like crossing off a colour on a list. The rhythm settles fast: work a band, drop a yarn, grab the next. Adding the wings feels like the reward. Many makers stitch a second Crochet Rainbow Bee Amigurumi just to shuffle the stripes.
Crochet Rainbow Bee Amigurumi
Because each stripe takes exactly one round of eighteen stitches, the body grows in quick colour swaps with almost no counting. I picked grey, black, green, purple, and black for my band of stripes, framed by golden yellow at the face and tail. Big black safety eyes and puffy pink cheeks sit on a flat face, while two fluffy white wings stand up over the back. My crochet rainbow bee amigurumi uses super bulky plush yarn, so it fills out fast and feels soft enough to squeeze. Leftover scraps cover most of the colours. Every colour change lines up along the top, right where the wings hide it.
Quick Facts
- Difficulty: easy, and a good first project with colour changes.
- Time: in my experience, one bee takes an hour or two, with the wing sewing and cheeks taking the longest.
Materials and Tools
- Super bulky (size 6) yarn in golden yellow for the face, tail, and closing rounds. Only a few grams of each colour are needed.
- Super bulky yarn in grey, black, green, and purple for the stripes. My stripe order is grey, black, green, purple, black, so the black is used twice.
- Super bulky yarn in white for the wings.
- A scrap of pink yarn for the cheeks.
- Crochet hook, 4.5 mm.
- 12 mm black safety eyes.
- Polyester fiberfill.
- Yarn needle, scissors, and a stitch marker.
I used a plush, chenille style yarn, which is why my bee looks so bumpy and squishy.
Customization Ideas
- Go back to the original rainbow order of green, blue, purple, pink, and peach for a brighter bee.
- Swap every stripe for alternating yellow and black to make a classic bumble bee.
- Pick stripe colours to match a favourite sports team or a pride flag.
- Add antennae by chaining a short length in black, tying a small knot at the tip, and sewing the cord to the top of the head.
- Use worsted yarn and a smaller hook for a pocket sized bee.
- Skip the safety eyes and embroider them for a baby friendly version.
Abbreviations and Pattern Notes
- Chain (ch).
- Single crochet (sc).
- Increase (inc): 2 single crochets in the same stitch.
- Decrease (dec): an invisible decrease worked through the front loops only.
- Slip stitch (sl st).
- Back loop only (BLO).
- Stitch or stitches (st, sts).
- Numbers in square brackets give the total stitches at the end of the round.
For a tighter fabric, you can work your single crochets with the yarn under, yarn over method. A standard yarn over works fine too.
Every stripe uses the same seamless colour change. On the last stitch of a round, stop when two loops remain on the hook and pull the new colour through both loops to finish the stitch. Then work the first stitch of the new round as a slip stitch in the back loop only, and work the remaining 17 stitches as regular single crochets in both loops.
The Pattern
1. The Bee Body
- Start with the golden yellow yarn.
- Round 1: Chain 2, then make 8 single crochets into the second chain from the hook, or work 8 single crochets into a magic ring instead [8]; you should have a small flat circle, the very centre of the face.
- Round 2: Increase in each stitch around [16].
- Round 3: (7 single crochets, 1 increase) repeat 2 times [18].
- Round 4: Work 1 single crochet in each stitch around [18]; the flat face now starts curving back into the body.
- At the end of Round 4, change to grey yarn using the seamless colour change.
The Stripe Rounds
- Round 5 (grey): Make 1 slip stitch in the back loop only of the first stitch.
- Work 17 single crochets in both loops around [18]; the first stripe sits right behind the yellow face, just as it does on mine.
- At the end of Round 5, change to black yarn.
- Round 6 (black): Make 1 slip stitch in the back loop only of the first stitch.
- Work 17 single crochets in both loops around [18]; the stripes should run straight around the body without any extra stitches creeping in.
- At the end of Round 6, change to green yarn.
- Round 7 (green): Make 1 slip stitch in the back loop only of the first stitch.
- Work 17 single crochets in both loops around [18]; the body now looks like a short striped tube.
- At the end of Round 7, change to purple yarn.
- Round 8 (purple): Make 1 slip stitch in the back loop only of the first stitch.
- Work 17 single crochets in both loops around [18]; check that the slip stitches from each round stack in one line, which forms the seam the wings will cover.
- At the end of Round 8, change to black yarn.
- Round 9 (black): Make 1 slip stitch in the back loop only of the first stitch.
- Work 17 single crochets in both loops around [18]; this second black stripe closes off the band of colour before the yellow tail.
- At the end of Round 9, change back to golden yellow yarn.
- Round 10 (yellow, part 1): Make 1 slip stitch in the back loop only of the first stitch.
- Make 1 single crochet in the next stitch and stop.
Eyes, Stuffing and Closing
- Pause here and turn the piece inside out.
- Find all the loose tails from the colour changes, take them two at a time, pull gently, and tie each pair in a double knot.
- Turn the piece back to the right side.
- Insert the 12 mm safety eyes between Rounds 2 and 3.
- Before locking the eyes, turn the bee so the colour change seam, the line of slip stitches, sits at the top centre of the head; the wings go directly over this seam to hide it.
- Secure the eyes with their washers; on mine the eyes sit wide apart near the outer edge of the flat face.
- Round 10 (yellow, part 2): Continue where you stopped and work 1 single crochet in each of the remaining 16 stitches [18].
- Round 11: (1 single crochet, 1 decrease) repeat 6 times around [12].
- Stuff the bee firmly with polyester fiberfill now.
- Shape the stuffing into an oval with a flat face and a long body, rather than a round ball; the side view should look like mine, with the face flat and the body stretching back.
- Round 12: (1 single crochet, 1 decrease) repeat 4 times around [8].
- Closing: Cut the yarn, leaving a 12 inch tail.
- Pull the yarn all the way through the final loop.
- Add a little extra stuffing through the opening if the tail end feels soft.
- Thread the tail onto the yarn needle and weave it through the front loops only of the final 8 stitches.
- Pull tight to close the hole.
- Fasten off securely and weave the tail into the body; the yellow tail end should finish round and smooth.
2. The Wings (Make 2)
- Use the white yarn.
- Round 1: Chain 2, then make 7 single crochets into the second chain from the hook, or work 7 single crochets into a magic ring [7].
- Round 2: Increase in each stitch around [14].
- Finish: Slip stitch into the next stitch to finish neatly.
- Tails: For the first wing, cut a short tail of about 6 inches.
- For the second wing, leave a long tail of about 12 inches for sewing; in plush yarn, each wing puffs up into a soft rounded shape like the ones on my bee.
3. Final Assembly
- Join the wings: Hold both wings together.
- Using the yarn needle and the short white tail, whip stitch 2 or 3 stitches along the edges to join the wings side by side.
- Place the joined wings: Set them on top of the bee, centred in line with the space between the eyes and resting over the colour change seam.
- On my bee the wings sit a little further back, over the green and purple stripes, and stand upright like two fluffy puffs.
- Sew the wings down: Use the long white tail to sew the base of the wings into the back of the bee.
- Push the needle back and forth between the body and the base of the wings until they feel secure.
- Hide the ends: Tie any remaining white ends together in a secure knot.
- Cut them short and tuck the knot deep inside the stuffed body with your needle or scissors.
- Cheeks: Thread a piece of pink yarn.
- Insert the needle through the bottom of the bee and bring it out exactly one stitch below one eye, leaving a tail hanging at the bottom.
- Insert the needle one stitch over to make a small horizontal line.
- Go over the same line twice to thicken it.
- Repeat under the other eye.
- Bring the needle back out through the bottom of the bee.
- Tie the two pink ends in a double knot, trim them, and poke the knot inside to hide it; on mine the cheeks look like plump pink ovals sitting just below each eye.
Three Tips for a Neat Bee
- Count by feel in plush yarn. Chenille style yarn hides the stitches, so run a finger along the round to find each loop, and keep a stitch marker in the first stitch.
- Keep the seam in a straight line. Check after every stripe that the slip stitches stack on top of each other, so one pair of wings covers them all.
- Shape while you stuff. Press the face flat with your palm and push extra fiberfill toward the tail before Round 12 to get that long oval body.
FAQ
Why does each stripe start with a slip stitch in the back loop?
Working the first stitch as a back loop slip stitch smooths out the step where one round meets the next. That keeps the stripes looking like clean rings instead of a jagged spiral.
Can I make this for a baby?
Safety eyes can come loose with heavy chewing, so for babies I embroider the eyes with black yarn instead. Make sure every knot is buried deep in the stuffing.
Can I use regular weight yarn?
Yes, but the bee will come out much smaller. Drop to a hook that suits the yarn and pick smaller safety eyes so they fit between Rounds 2 and 3.
My colour change seam shows below the wings. What can I do?
Usually the seam has drifted to one side. You can sew the wings slightly off centre to cover it, or stitch a black antenna cord along the visible part so it blends in.




