Crochet Doll Raincoat Free Pattern Amigurumi

Nursery bookends hold a cheerful sentry once the crochet raincoat doll amigurumi settles between them, her yellow curl peeking out of the red hood. Bright red and yellow make the hooded bear doll amigurumi a lucky pick for Lunar New Year tables and gift bags.

Rain on the window is the cue to set the Crochet Raincoat Doll Amigurumi on the sill. Stitch one for April showers or monsoon season, and it keeps its hood up until the clouds clear. Puddle season at school counts too, so tuck a Crochet Raincoat Doll Amigurumi into a backpack.

Crochet Raincoat Doll Amigurumi


Working around both sides of a short foundation chain gives this doll a wide oval face before the rounds even start to stack. I stitched the head in sunny yellow, then switched to red for a body that pinches in at the neck and rounds out like a little daruma. Over everything sits a red hood with two round bear ears, framing the face like a raincoat on a stormy walk to school. My crochet raincoat doll amigurumi came together over one rainy weekend, and she now keeps watch over the dining table. Embroidered brows, a tiny smile, and striped pink cheeks give her a hopeful look. Finally, two yellow patches finish the front.

Why I Love This One

She looks like she is waiting at the door for someone to grab an umbrella, and that hopeful little face makes everyone who walks past stop and smile.

What You Need

  • Yellow yarn for the head and face, the forehead tuft, and the front patches.
  • Red yarn for the body, the hood, and the ears.
  • Small amounts of dark brown and white for the eyes.
  • Small amounts of black for the brows and mouth.
  • Small amounts of pink and a darker red or brown for the cheeks and the marks on the front patches.
  • A crochet hook that suits your yarn, ideally a size or so smaller than the label suggests so the fabric stays tight.
  • Toy stuffing (fiberfill).
  • Yarn needle.
  • Stitch marker.
  • Pins for placing the hood and patches before sewing.
  • Scissors.

I used a soft, chunky yarn, which is why my doll has such plump, defined stitches. Felt is optional if you would rather cut the eyes than crochet them.

Difficulty and Time

The body and head use only single crochet, increases, and decreases, so the shaping is friendly for an advanced beginner. The hood and face details ask for more patience than skill. In my experience the whole doll fits into a relaxed weekend, with the face embroidery taking longer than you might expect.

The Pattern

1. The Head

  • Use the yellow yarn for the whole head.
  • Round 1: Chain (CH) 7.
  • Starting in the second chain from the hook, work 5 single crochets (SC) into the back bumps or half loops of the chain.
  • Work a W stitch, which is 3 single crochets in the same stitch, into the last chain.
  • Rotate your work so you can crochet along the opposite side of the foundation chain.
  • Work 4 single crochets along the remaining half loops.
  • Work 1 increase (INC), which is 2 single crochets in the same stitch, into the last stitch.
  • Slip stitch (SL ST) into the first stitch to join, then chain 1 [14 stitches]; you should have a small flat oval, the very start of the face.
  • Round 2: Work 1 increase in the first stitch.
  • Work 4 single crochets.

  • Work 3 increases, one in each of the next 3 stitches.
  • Work 4 single crochets.
  • Work 2 increases, one in each of the last 2 stitches.
  • Slip stitch into the first stitch, then chain 1 [20 stitches]; the increases bunch at the two curved ends while the long sides stay straight.
  • Round 3: Work [1 single crochet, 1 increase] once.
  • Work 4 single crochets.
  • Work [1 single crochet, 1 increase] 3 times.
  • Work 4 single crochets.
  • Work [1 single crochet, 1 increase] 2 times.
  • Slip stitch to join, then chain 1 [26 stitches]; the oval should still lie flat with no cupping or ruffling.
  • Round 4: Work [2 single crochets, 1 increase] once.
  • Work 4 single crochets.
  • Work [2 single crochets, 1 increase] 3 times.
  • Work 4 single crochets.
  • Work [2 single crochets, 1 increase] 2 times.
  • Slip stitch to join, then chain 1 [32 stitches]; this flat oval is now the full width of the face.
  • Rounds 5 to 9: Work 1 single crochet in each stitch around for 5 rounds.
  • Slip stitch to join at the end of each round, then chain 1 [32 stitches in each round]; the sides rise into a deep oval cup, and the flat front becomes the yellow face you see on mine.
  • Do not fasten off the head; join the red yarn in the last stitch of Round 9 and carry straight on into the body, as I did for my red raincoat body.

2. The Body

  • Use the red yarn for every body round.
  • Round 10: Work [2 single crochets, 1 decrease (DEC)] 8 times around, where a decrease means crocheting 2 stitches together [24 stitches]; the work starts to curve inward under the face.
  • Round 11: Work [4 single crochets, 1 decrease] 4 times around [20 stitches]; this narrow round forms the neck, the visible ridge where my head meets the body.
  • Round 12: Work [1 single crochet, 1 increase] 10 times around [30 stitches]; the body flares out quickly below the neck.
  • Round 13: Work 1 single crochet in each stitch around with no increases or decreases [30 stitches]; this is the widest, roundest part of the body.
  • Round 14: Work [3 single crochets, 1 decrease] 6 times around [24 stitches]; the body begins curving under toward the base.
  • Round 15: Work [2 single crochets, 1 decrease] 6 times around [18 stitches]; the base keeps drawing in.
  • Round 16: Work [1 single crochet, 1 decrease] 6 times around.
  • Slip stitch into the first stitch and pull up your loop [12 stitches]; the opening is now small enough to finish after stuffing.
  • Stuff the head and body firmly with toy stuffing, packing the neck well so the head stays upright.
  • Round 17: Work 6 decreases around to close the hole.
  • Slip stitch into the first stitch, then chain 1 [6 stitches]; the base should be nearly closed.
  • Finishing: Fasten off (FO), cut the yarn, and leave a small tail.
  • Thread the tail onto a yarn needle and weave it through the front loops of the remaining 6 stitches.
  • Pull tight to close the gap completely, tie a small knot, and hide the tail inside the body; the finished doll should sit upright on its rounded base, the way mine sits on the table.

3. Face Details

  • Eyes: Make two small dark brown circles, either crocheted in the round or cut from felt.
  • Sew the eyes onto the face a little below the middle, set wide apart with plenty of yellow between them.
  • Embroider a small white dot near the top of each eye for a highlight; on mine the dots sit toward the upper inner corner so she looks up at you.
  • Brows: Embroider a short black line above each eye, tilted slightly for a soft, hopeful expression.
  • Mouth: Embroider a small black cat style mouth centred below the eyes, with a short centre line that curves out into two little bumps.
  • Cheeks: Embroider an oval of pink yarn on each cheek, just below and to the outside of each eye.
  • Stitch a few short darker lines across each pink patch; the stripes give my doll that bashful blush.
  • Forehead tuft: With yellow yarn, make a small oval piece, starting with a short chain and working around both sides the same way the head began.
  • Sew the tuft at the top centre of the face so it overlaps the edge of the hood once the hood is on, as on mine.

4. Hood and Ears

  • Hood: With red yarn, crochet a cupped piece in rounds, working until it covers the back and sides of the head when you hold it in place.
  • Leave the front open so the hood frames the whole yellow face.
  • Work a round of single crochet or surface slip stitches around the opening, if you like, for the thick raised rim you see around my doll's face.
  • Pin the hood in place so the rim sits evenly around the face and its lower edge meets the neck ridge.
  • Sew the hood to the head around the face and along the neck.
  • Ears: With red yarn, make two small circles in the round and let them cup slightly.
  • Sew one ear on each side of the top of the hood, set wide apart like little bear ears.

5. Front Patches

  • With yellow yarn, make two small circles in the round.
  • Embroider a small brown T shape on each circle; on mine they read like tiny bells or paws.
  • Pin the patches to the lower front of the body, one on each side, sitting close to the base.
  • Sew each patch down around its edge.

Tips and Troubleshooting

Keep a stitch marker in the first stitch of every round. With joined rounds, the seam drifts easily, and you want it running down the back of the doll where the hood hides it.

Embroider the face before Round 17 if you can. Reaching inside the head to anchor knots is far easier while the base is still open, though I added a few touches afterward and simply buried the knots under stitches.

Also pack the neck firmly. A soft neck lets the heavy head flop forward, and the hood will not fully hide that tilt.

Pin everything first. The hood rim, ears, tuft, and patches all shift as you sew, and a few pins keep the face centred.

Use a tighter hook than the yarn label calls for. Dense fabric keeps the stuffing from showing through, especially on the yellow face.

 

Make It Your Own

  • Turn the hood yellow and the body a contrasting colour for a classic rain slicker look.
  • Swap the bear ears for frog eyes or bunny ears.
  • Leave off the front patches for a cleaner silhouette.
  • Make a tiny matching umbrella from a pipe cleaner and a crocheted circle.

FAQ

Can I use safety eyes instead of crocheted ones?

You can, but fit them before stuffing and before Round 17 closes the body. If a small child will hug this doll, stick with crocheted or felt eyes, which is what I used.

Do I have to work joined rounds?

The pattern joins each round with a slip stitch and a chain 1. Keep the joins so your counts line up with each round, and turn the seam to the back so the hood covers it.

Can I skip the hood?

Yes. Without it you get a round yellow head on a red body, which looks sweet on its own. You lose the raincoat look, though, so I would at least add the ears straight to the head.

How big does the doll turn out?

Mine came out a comfortable shelf size that fits easily in two hands, but your yarn weight and hook change that a lot. Thicker yarn gives a larger, squishier doll.

0 Shares

Leave a Reply

Your email address will not be published. Required fields are marked *