Little Princess Crochet Pattern Free Amigurumi - Mini Doll

Miniature wooden chairs seat the doll from this little princess crochet pattern for pretend tea parties beside tiny cups. Pink and mustard tones brighten nursery bookshelves, where the mini amigurumi doll stands upright on her chunky Mary Jane shoes.

Your hands cradle the Crochet Little Amigurumi Princess, and she answers with a stitched smile. Her eyes and brows hold a look of quiet curiosity. Tilt the brim low and your Crochet Little Amigurumi Princess turns shy. Push it back and she seems ready to greet every guest at tea.

Crochet Little Amigurumi Princess

Under her dress, the head and body work up as one joined piece, built round by round from a single magic ring. I gave my little amigurumi princess a pink bucket hat and grey curls that tumble out from beneath the brim. Her bodice and tiny cap sleeves come in mustard yellow, while a ridged pink skirt flares out to the knees. Matching Mary Jane shoes in mustard finish her slim cream legs. Simple black safety eyes, thin eyebrows, and a soft pink smile give her a calm, gentle face. Expect a few relaxed evenings for this crochet doll, in my experience.

Quick Facts

  • Difficulty: Easy to intermediate. The head, body, shoes, and hat are basic rounds, while the dress sleeves and the hair loops take a bit more attention.
  • Time: Roughly four to six hours in my experience, with about a third of that going on the dress and the face details.
  • Finished size: Mine stands about the length of an adult hand from hat to shoes when worked on a 2.5 mm hook.

Materials and Tools

  • About 50 g of yarn in total, in light cream (skin), mustard yellow (bodice and shoes), pink (skirt and hat), and medium grey (hair)
  • Scraps of black yarn or embroidery thread for the eyebrows and lashes
  • Scraps of pale pink and medium pink yarn for the nose and mouth
  • A tiny scrap of orange yarn for the shoe button
  • Green yarn for the dress skirt and yellow for a scalloped hem (optional, from the original pattern)
  • 2.5 mm crochet hook
  • Small black safety eyes
  • Polyester fiberfill stuffing
  • Yarn needle and scissors
  • Stitch marker

Customization Ideas

Swap the hat and skirt colours to suit the person you're making her for. Lilac with soft grey or mint with white both look lovely. For a more classic princess, add the yellow scalloped hem from the original pattern and stitch a tiny crown onto the hat. Brown, black, or ginger hair changes her whole personality, and short chain loops give a bob while longer ones give flowing waves. If the doll is for a baby, embroider the eyes instead of using safety eyes.

Little Amigurumi Princess Pattern

The pattern uses US terms. Abbreviations: single crochet (sc), slip stitch (sl st), chain (ch), increase (inc, 2 sc in the same stitch), decrease (dec, 2 stitches worked together), half double crochet (hdc), double crochet (dc), and back loop only (BLO). The head and body rows are joined rounds.

Head and Body (Light Cream)

  • Magic ring: Work 6 sc into a magic ring, pull the tail tight to close it, then sl st into the first stitch and ch 1.
  • Row 2: Inc in every stitch around (12 sc), then sl st and ch 1.
  • Row 3: [1 inc, 1 sc] repeat all around (18 sc), then sl st and ch 1.
  • Row 4: [2 sc, 1 inc] repeat all around, then sl st and ch 1.
  • Row 5: [1 inc, 3 sc] repeat all around (30 sc), then sl st and ch 1, and you should have a flat disc for the top of the head.
  • Row 6: [1 sc in each of the next 14 stitches, 1 inc] repeat.
  • Rows 7 to 14: Work 1 sc in every stitch around for 8 rounds, and the head will rise into a tall, rounded dome.
  • Insert the safety eyes now, before you start decreasing; on mine they sit a little below the middle of the face and fairly wide apart, so pin them first and check the spacing from the front.
  • Row 15: [1 dec, 2 sc] repeat all around, then sl st and ch 1.
  • Row 16: [1 dec, 1 sc] repeat all around, and the opening narrows into the neck.
  • Stuff the head firmly through the neck opening before you carry on, because it gets much harder to reach once the body grows.
  • Rows 17 to 18: Work 2 rounds of sc only.
  • Row 19: [3 sc, 1 inc] repeat around.
  • Row 20: Work sc only around.
  • Row 21: Work 41 sc around.
  • Row 27: [Dec, 1 sc] repeat, then [dec, 2 sc] repeat across the round, stuffing the body firmly as the base closes.
  • Closing: Pull the yarn tight, weave it through the last stitches with a needle, and close the bottom opening securely.

Face Details

  • Using black yarn or embroidery thread, stitch a thin, gently arched eyebrow above each eye, set slightly wider than the eyes themselves.
  • Add a short lash stitch at the outer corner of each eye with the same black thread; on mine it's a single small flick angled upward.
  • Stitch a tiny nose in pale pink with a few small straight stitches just below and between the eyes.
  • Stitch a short horizontal smile in medium pink below the nose, keeping it small so the face stays soft.

Arms and Legs (Make 4, Light Cream)

  • Ch 13.
  • Row 2: Skip the first chain, then working in the back loops, sl st all the way across (12 sl st), and fasten off with a tail for sewing.
  • Make 4 identical pieces, 2 for the arms and 2 for the legs.
  • Sew the arms to the shoulders so they hang down along the sides of the body; on mine they come out just below the sleeves and reach the top of the skirt.
  • Sew the legs to the base of the body so they hang straight down below the skirt, side by side with a small gap between them.

Shoes (Make 2, Mustard Yellow)

  • Magic ring: Work 6 sc into the ring, pull tight, and sl st to the first stitch.
  • Row 2: [1 sc, 1 sc, 1 inc] then repeat one more time, then sl st and ch 1.
  • Row 3: Work 1 sc in every stitch around.
  • Row 4: [3 sc, 1 inc] repeat two times.
  • Rows 5 to 6: Work sc around for 2 rounds.
  • Row 7: Work 2 dec, then 6 sc, and the toe shapes into a rounded front like mine.
  • Row 8: Work sc all around, then fasten off with a tail for sewing.
  • Attach each shoe to the bottom of a leg so the rounded toes point forward.
  • For the Mary Jane strap on mine, ch with mustard yarn until the chain reaches across the top of the shoe, then sew one end to each side.
  • Stitch a tiny knot in orange yarn at the strap on one shoe as a button, as on mine, or on both shoes if you prefer them to match.

Dress (Mustard Yellow Bodice, Pink Skirt)

  • Foundation: Make a slip knot and ch 20 in mustard.
  • Row 2: Skip the first chain, then work 1 sc in every chain across (19 sc).
  • Row 3 (upper bodice and sleeves): Skip the first stitch, work 1 sc, then work increases.
  • Sleeve formation 1: Work 3 dc in the same stitch, then 3 dc in the next stitch.
  • Work sc with 5 increases along the front section.
  • Sleeve formation 2: Work 3 dc in the same stitch, then 3 dc in the next stitch.
  • Complete the remaining stitches in sc and sl st to join, and the two dc groups should fan out as small cap sleeves.
  • Row 3 (joining sleeves): Skip 6 stitches for the sleeve, ch 2, and work sc across the front and back.
  • Row 4 (skirt top): Work hdc across, putting 2 hdc into each sleeve chain gap, then ch 1 and turn, which finishes the mustard bodice on mine.
  • Row 5 (colour change): Switch to pink (the original pattern uses green), ch 1, work an inc, then work into the back ridge loops in an [inc, dc, dc] repeat.
  • Rows 6 to 7: Work dc in the back loops only for 2 rows, and the unworked loops leave the horizontal ridges you can see on my skirt.
  • Row 8: Sl st in every stitch around (42 sl st) for a neat, firm hem.
  • Row 9 (scalloped edge, optional): Switch back to yellow, ch 5, sl st into the next stitch, and repeat all the way around; I skipped this row, so mine finishes with a clean pink hem.
  • Slip the dress over the head and down onto the body so the bodice sits just below the neck and the sleeves sit on top of the arm joins, then stitch any open edges closed so it stays in place.

Hat and Hair (Pink Hat, Grey Hair)

  • Hat base: Work 12 hdc into a magic ring in pink, pull tight, and sl st.
  • Row 2: [2 hdc, 1 inc] repeat around.
  • Row 3: [3 hdc, 1 inc] repeat around.
  • Row 4: [5 hdc, 1 inc] repeat around.
  • Rows 5 to 7: Work 35 hdc in every row, and the hat now looks like a deep cap.
  • For the turned out brim on mine, work one or two more rounds, increasing evenly until the edge flares out to your liking.
  • Attach grey yarn to the back ridge loops on the inside of the hat.
  • Front framing strands: Ch 4, sl st into the next stitch, and repeat across the front section.
  • Side and back strands: Ch 5, sl st into the next stitch, and repeat all around to form the longer strands; on mine the chain loops twist into chunky curls that reach about jaw level.
  • Place the hat on the head tilted slightly back so the brim sits just above the eyebrows and the curls frame the face from the temples down, leaving the forehead clear, then sew it securely in place.

Tips

  1. Pin the arms, legs, and shoes before sewing. Small differences in placement make her stand crooked or look lopsided.
  2. Keep the hair loops relaxed. Pulling the chains tight stops them twisting into curls, so let them sit loose before you slip stitch.
  3. Embroider the face before the hat goes on. The brim gets in the way of your needle once it's attached.

Yarn Substitution

A fine cotton or cotton blend in a similar weight gives the crisp, matte stitch look of my doll and holds the hat brim well. Acrylic works too and feels softer, though the brim may relax a little more. A thicker yarn on a larger hook makes a bigger doll, so make sure the stuffing is firm enough that the head doesn't flop on the neck.

Frequently Asked Questions

Can I make her safe for a baby? Skip the safety eyes and embroider them with black yarn instead. Sew every part on very securely, and leave off the tiny shoe button.

My hair loops won't curl. What am I doing wrong? Tight chains stay straight. Work the chains a little looser, and give each loop a gentle twist with your fingers once the hair is finished.

Can I make the dress removable? Yes. Skip the final stitching once the dress is on. The pink skirt is wide enough to stay put over the body without sewing.

My hat keeps sliding off. How do I fix it? Sew it on all the way around the inside edge rather than at a few points. The hair rows add weight, so a few anchor stitches through the head keep it steady.

0 Shares

Leave a Reply

Your email address will not be published. Required fields are marked *