Crochet Seal Pup Amigurumi Pattern Free - Chunky Blue Plush Seal

Wild seal pups spend hours lounging on the rocks, and this crochet seal pup amigurumi copies that lazy sprawl along a sofa arm or a windowsill. Toddlers can carry the long blue plush seal by its forked tail, and the wide, flat belly makes a soft chin rest during story time.

Winter nights on the couch go better with this Crochet Seal Pup Amigurumi tucked under one arm. Give one at a baby shower with an ocean theme, or slip it into a holiday stocking. Come summer, the Crochet Seal Pup Amigurumi rides along to the beach house as a car pillow.

Crochet Seal Pup Amigurumi

Head and body are worked as one long continuous piece, so only the tail and flippers need separate rounds. I worked mine in bright cobalt blue chenille, which gives the finished seal that dense, squishy look straight off the hook. Two big black embroidered eyes sit side by side near the front of the face, each one edged with a small white highlight. A flat black nose marks the tip of the snout area below them. My crochet seal pup amigurumi has two rounded flippers sewn under the body and a split tail at the back that the pattern builds directly from the closing round.

Why I Love This One

A toy that fills your hands and bounces back when you squeeze it is a hard thing to put down, and this seal in chunky chenille does exactly that every time.

A Few Words on the Yarn

Super bulky chenille hides stitches, so you cannot count by eye the way you do with cotton or acrylic. Use your stitch marker religiously and count before every decrease round, because a missed stitch shows up as a lump in the body much later. The yarn itself is very forgiving of tension differences, and the large scale makes each piece work up in very few rows. The trade off is that the fabric does not block or stretch, so what you see as you go is exactly what you get.

Materials and Tools

  • Super bulky chenille yarn in cobalt blue for the whole body, head, and flippers
  • Black yarn for the embroidered facial features
  • White yarn for the eye highlights
  • 6 mm crochet hook
  • Polyester toy stuffing
  • Yarn needle and stitch markers
  • Scissors

The original pattern uses King Cole Yummy yarn. Any super bulky chenille of similar weight will work, as long as you keep your stitch marker in place every round.

Abbreviations (US Terms)

  • sc: single crochet
  • inc: increase, 2 sc in the same stitch
  • dec: decrease, single crochet 2 stitches together
  • ch: chain
  • dc: double crochet
  • sl st: slip stitch
  • MR: magic ring
  • st(s): stitch(es)

The Pattern

Part 1: Head and Body

  • Use cobalt blue yarn.
  • Round 1: work 6 sc into a MR (6 sts). Pull the ring closed firmly; a loose center will gap later.
  • Round 2: inc in each stitch around (12 sts).
  • Round 3: [1 sc, inc] repeat 6 times (18 sts).
  • Round 4: [2 sc, inc] repeat 6 times (24 sts).
  • Round 5: [3 sc, inc] repeat 6 times (30 sts). This is the full width of the head.
  • Rounds 6 to 11 (6 rounds): sc in each stitch around (30 sts). The head rounds build the skull; keep your tension even here so the big round head holds its shape when stuffed.
  • Round 12: [1 sc, dec] repeat 6 times, then sc in the next 12 stitches (24 sts). The first half of this round decreases the neck and the second half stays plain, which eases the transition into the body.
  • Rounds 13 to 20 (8 rounds): sc in each stitch around (24 sts). These rounds form the long barrel of the body.
  • Stuffing: stuff the head firmly with toy stuffing now, while the opening is still wide enough to reach inside. Push stuffing into the forehead so it stays fully round.
  • Round 21: [6 sc, dec] repeat 3 times (21 sts). The body starts to taper toward the tail.
  • Round 22: sc in each stitch around (21 sts).
  • Round 23: [5 sc, dec] repeat 3 times (18 sts). The taper continues; the body should look clearly narrower than it did at Round 20.
  • Round 24: sc in each stitch around (18 sts).
  • Round 25: work 6 dec, then sc in the next 6 stitches (12 sts). The back half of the body closes in sharply here.
  • Rounds 26 to 29 (4 rounds): sc in each stitch around (12 sts). These short rounds become the narrow neck of the tail.
  • Stuffing: finish stuffing the body before building the tail, since the opening is now too small to reach in comfortably once the tail is done.

Part 2: Tail

  • Continue with the cobalt blue working yarn.
  • First tail lobe: ch 5, skip the first 2 chains, work 1 dc in the 3rd chain from the hook, then 1 dc in each of the next 2 chains. Join back to the body opening.
  • Close the body: work 4 sc through both sides of the remaining opening, leaving 1 pair of stitches unworked at the end.
  • Second tail lobe: ch 5, skip the first 2 chains, work 3 dc starting in the 3rd chain from the hook. Join back to the body with a sl st in the unworked stitch.
  • Finish: cut the yarn, fasten off, and weave in the end. Both tail lobes should spread outward from the tip of the body.

Part 3: Flippers (Make 2)

  • Use cobalt blue yarn.
  • Round 1: work 6 sc into a MR (6 sts).
  • Round 2: inc in each stitch around (12 sts).
  • Round 3: [1 sc, inc] repeat 6 times (18 sts).
  • Round 4: [2 sc, inc] repeat 6 times (24 sts). The piece is a flat circle at this point.
  • Seaming: fold the circle in half with the wrong side on the inside. Work sc through both layers to seam it shut, stopping a few stitches before the end. Do not stuff; the flippers stay flat.
  • Finish: cut the yarn, fasten off, and leave a long tail for sewing. Repeat from Round 1 for the second flipper.

Part 4: Snout

  • The original pattern includes a separate crocheted snout. My seal uses embroidery directly on the face, so this piece is optional. If you want a raised snout, work as follows.
  • Round 1: work 6 sc into a MR (6 sts).
  • Round 2: inc in each stitch around (12 sts).
  • Round 3: [3 inc, 3 sc] repeat 2 times (18 sts). The extra increases on one side push the snout into a slightly oval shape.
  • Round 4: sc in each stitch around (18 sts).
  • Finish: sl st into the next stitch and fasten off, leaving a long tail for sewing.

Part 5: Assembly and Facial Features

  • Flippers: sew one flipper to each side of the body just below the neck area, with the seam facing forward. On my seal the flippers are wide and round, positioned so they stick out from the lower sides and angle slightly downward; one sits under the snout area and the other balances on the opposite side.
  • Snout (optional): position it on the face with the widest part horizontal and sew around the edge, adding a small amount of stuffing before fully closing it.
  • Eyes: using black yarn and a yarn needle, embroider two large oval shapes side by side near the front of the face, below the center of the forehead. On my seal the eyes are very large and prominent, sitting close together and angled slightly inward at the bottom. Work back and forth across each oval with short satin stitches until both look solid.
  • Eye highlights: add a small white yarn stitch at the outer upper corner of each eye. On my seal these are short diagonal lines that catch the light and give each eye depth.
  • Nose: just below and between the eyes, embroider a flat black oval using short horizontal stitches.

Tips

  • Place the stitch marker before Round 12 and double check your count at the end of Round 11. Round 12's mixed decrease and plain section relies on arriving at exactly 30.
  • Chenille yarn can loosen as you stuff, so overstuff the head slightly before moving to the body rounds. Firmness is much harder to add once the body is long.
  • Sew the flippers on before embroidering the face. Getting the placement right on both sides is easier when the face is still a blank canvas.

Yarn Substitution

Super bulky chenille is the defining feature of this seal. A plain super bulky acrylic gives a firmer, less plush result. A worsted chenille or velvet yarn will work with a smaller hook and come out as a much smaller toy. Whatever you choose, go a size down on the hook from the label suggestion so the fabric stays firm enough to hide stuffing.

Customization Ideas

  • Try pale gray or ivory for a classic harp seal pup look.
  • Embroider whiskers on each side of the nose with long straight stitches.
  • Make the eyes round instead of oval for a more cartoon style.

FAQ

The body looks lumpy on one side. What happened?

The decrease in Round 12 is uneven. If some decreases fall on top of each other, they pull the fabric. Space your decreases evenly around the neck and count the 12 plain stitches carefully after them.

Can I use the separate snout instead of embroidery?

Yes. The snout step is in the pattern but marked optional since I went with direct embroidery. Sew it on over the face where the nose and eyes will sit, then embroider the features onto the snout itself.

How big does the finished seal come out?

Mine fills two hands. The pattern gives no finished measurement, so the size will vary with your yarn and tension. Super bulky yarn makes a noticeably large toy.

Is this safe for babies?

No. Embroidery thread and chenille fibers can pull loose, and the yarn tails need to be very well secured. It makes a better gift for older children or adults.

0 Shares

Leave a Reply

Your email address will not be published. Required fields are marked *