Crochet Ragdoll Bee Mallows Amigurumi Pattern
On a desk or a sunny windowsill, the crochet ragdoll bee mallows amigurumi stands upright by itself and doubles as decor between uses. Young plush collectors and gardeners will enjoy a palm sized crochet bee pouch that slips into a tote, a school bag, or a spring gift basket.
Coins, lip balm, and earbuds all fit inside the Crochet Ragdoll Bee Mallows Amigurumi, which explains why requests keep coming. Friends spot it in a handbag, ask about it, then ask for their own. The wink helps. Craft fair sellers often find the Crochet Ragdoll Bee Mallows Amigurumi goes before the plain pouches.
Crochet Ragdoll Bee Mallows Amigurumi
Two flat panels worked in rows and crocheted together around the edges give this bee its pillow shape. I used intarsia colour work to place a dark charcoal stripe right across the lower body on the front panel, keeping the back panel a single solid mustard yellow. My crochet ragdoll bee mallows amigurumi has a yellow zipper running along one side so the whole piece opens into a pouch. Bobble tipped antennae stand up from the top, and a pair of off white wings sits on each side. Two small safety eyes, embroidered lashes, and pink cheeks complete the face. The result looks flat from the front but holds its shape like a small cushion.
Beginner Notes
This project is a great first flat amigurumi. Before you start, take a few minutes with these terms and techniques.
- Chain (ch): yarn over and pull through the loop on your hook.
- Single crochet (sc): insert the hook, pull up a loop, yarn over, and pull through both loops.
- Half double crochet (hdc): yarn over, insert the hook, pull up a loop, yarn over, and pull through all three loops at once.
- Increase (inc): work 2 single crochets into the same stitch to add a stitch.
- Decrease (dec): for the beginning of a row, skip the first stitch and single crochet into the second. For the end of a row, insert the hook into the next stitch, pull up a loop, insert again into the following stitch, pull up a second loop, then yarn over and pull through all three loops, which is called a single crochet 2 together or sc2tog.
- Slip stitch (sl st): insert the hook, yarn over, and pull through both the stitch and the loop on your hook.
- Intarsia: a technique for working a block of colour in flat rows without carrying the yarn across the back. You use a separate small ball or mini skein for each colour section and let them hang at the back when not in use, twisting the yarns around each other at each colour join to avoid a gap.
- Wrong side (WS) and right side (RS): the wrong side is the back of your work where ends are hidden; the right side is the face that people see.
- Ch 1 and turn: at the end of every row, chain 1 and flip your work so the next row starts from the opposite end.
Mini skein preparation: before starting the front panel, wrap yellow yarn around a clothespin 25 times and cut, leaving a 30 cm tail. This small skein handles the right side of the intarsia stripe so you do not have to carry yarn all the way across.
Intarsia colour joins: when switching colours, bring the new colour up from under the old one. That twist locks the two sections together and closes the gap between them.
Keep your tension even in intarsia rows. It is easy to pull the join too tight, which puckers the row. Let the yarns hang naturally and just give them a gentle snug before moving on.
What You Need
- 100 percent acrylic yarn, approximately 2 mm thick, in mustard yellow for the main body (approximately 25 to 30 grams).
- Same weight yarn in dark charcoal or black for the stripe, antennae, and zipper pull area.
- Same weight yarn in off white or cream for the wings.
- A small amount of pink or peach yarn for the cheeks.
- Crochet hook, 3.0 mm.
- 8 mm black safety eyes, 2.
- A yellow zip approximately the length of one side of your finished bee, for the pouch opening.
- Silicone fiberfill or standard toy stuffing, a small amount for behind the panels.
- Tapestry needle and scissors.
- Sewing needle and thread to match the yellow yarn, for attaching the zipper.
- Optional: liquid silicone or hot glue to keep the wings flat.
Difficulty and Time
This is an easy to intermediate project. The front panel looks complicated because of the intarsia stripe, but each section is just single crochet. In my experience the two panels take an afternoon, the wings and antennae are quick, and fitting the zipper is the step that asks for the most patience.
The Pattern
Front Panel
Work in rows. At the end of every row, chain 1 and turn.
- Row 1: With mustard yellow yarn, chain 11. Starting in the second chain from the hook, work 10 single crochets [10].
- Row 2: Work 2 increases in the first two stitches, 6 single crochets, 2 increases in the last two stitches [14].
- Row 3: Work 1 increase, 12 single crochets, 1 increase [16].
- Intarsia colour work begins at Row 4. Have the main yellow yarn, the dark charcoal yarn, and the small yellow mini skein ready. When you switch colours, twist the yarns around each other at the join to close the gap.
- Row 4: In yellow, work 1 increase and 2 single crochets. Switch to dark charcoal, work 10 single crochets. Switch to the small yellow mini skein, work 2 single crochets and 1 increase [18].
- Row 5: In yellow, work 3 single crochets. Switch to dark charcoal, work 12 single crochets. Switch to main yellow, work 3 single crochets [18].
- Row 6: In yellow, work 3 single crochets. Switch to dark charcoal, work 12 single crochets. Switch to small yellow mini skein, work 3 single crochets [18].
- Row 7: Repeat Row 5 [18].
- Row 8: Repeat Row 6 [18].
- Row 9: In yellow, work 4 single crochets. Switch to dark charcoal, work 10 single crochets. Switch to main yellow, work 4 single crochets [18].
- Row 10: In yellow, work 4 single crochets. Switch to dark charcoal, work 10 single crochets. Switch to small yellow mini skein, work 4 single crochets [18].
- Row 11: In yellow, work 5 single crochets. Switch to dark charcoal, work 8 single crochets. Switch to main yellow, work 5 single crochets [18]. Cut the dark charcoal yarn and the small yellow mini skein and tie their ends off on the wrong side.
- Rows 12 to 15: In yellow, work 18 single crochets in each row [18 in each row].
- Row 16: Work 1 decrease at the start, 14 single crochets, 1 decrease at the end [16]. For the first decrease, skip the first stitch and single crochet into the second. For the last, use a standard single crochet 2 together.
- Row 17: Work 16 single crochets [16].
- Row 18: Work 1 decrease, 12 single crochets, 1 decrease [14].
- Row 19: Work 14 single crochets [14].
- Row 20: Work 1 decrease, 10 single crochets, 1 decrease [12].
- Row 21: Work 12 single crochets [12].
- Row 22: Work 1 decrease, 8 single crochets, 1 decrease [10].
- Row 23: Work 2 decreases, 2 half double crochets, 2 decreases [6]. Fasten off and leave a tail.
Back Panel
Work entirely in mustard yellow. Follow the same shaping as the front panel but ignore all colour changes.
- Row 1: Chain 11, starting in the second chain from the hook, work 10 single crochets [10].
- Row 2: Work 2 increases, 6 single crochets, 2 increases [14].
- Row 3: Work 1 increase, 12 single crochets, 1 increase [16].
- Row 4: Work 1 increase, 14 single crochets, 1 increase [18].
- Rows 5 to 15: Work 18 single crochets in each row [18 in each row].
- Row 16: Work 1 decrease, 14 single crochets, 1 decrease [16].
- Row 17: Work 16 single crochets [16].
- Row 18: Work 1 decrease, 12 single crochets, 1 decrease [14].
- Row 19: Work 14 single crochets [14].
- Row 20: Work 1 decrease, 10 single crochets, 1 decrease [12].
- Row 21: Work 12 single crochets [12].
- Row 22: Work 1 decrease, 8 single crochets, 1 decrease [10].
- Row 23: Work 2 decreases, 2 half double crochets, 2 decreases [6]. Fasten off.
Face Details on the Front Panel
Add all face details before joining the panels.
- Safety eyes: Insert the 8 mm black safety eyes on Row 17, counting 4 ridges down from the top edge. Place each eye 5 stitches inward from the outer edge. Secure with washers.
- Eyelashes: With dark charcoal yarn or thin embroidery thread, sew a small double stitch along the outer upper edge of each eye and a single stitch extending straight outward. On mine the lashes curve slightly upward.
- Cheeks: With pink yarn, sew 2 horizontal passes over 3 stitches directly one row below each eye.
- Nose: With dark charcoal yarn, embroider a small V shape between the eyes, one row below them.
Zipper and Panel Joining
- Pin the yellow zipper along one side edge of the front panel with wrong sides together, centering it so the pull tab is accessible and the zipper teeth face inward.
- Sew the zipper tape to the front panel edge using a sewing needle and thread, keeping your stitches small and even.
- Sew the other side of the zipper tape to the matching edge of the back panel in the same way.
- Open the zipper partway so you can turn the piece and stuff it later.
- Hold the front and back panels together with wrong sides facing inward.
- Join mustard yellow yarn on the side nearest the cheek level.
- Single crochet evenly down the side, working one single crochet per row end; the join stitches form the border you see running around my bee.
- Bottom corner: work 2 single crochets in the corner stitch.
- Across the 10 stitches of the bottom edge, work 3 single crochets in yellow, switch to dark charcoal for 5 single crochets, then switch back to yellow for 2 single crochets. Work 2 single crochets in the next corner stitch.
- Continue joining up the other side and across the top 6 stitches in yellow.
- Before fully closing the top, stuff the bee lightly through the zipper opening. Keep the stuffing light directly behind the safety eyes so they indent slightly for expression.
- Finish with an invisible join and weave in the end.
Stinger Tip
- Go back to the 5 dark charcoal stitches at the very bottom of the joined edge.
- Join dark charcoal yarn.
- Row 1: Skip the first stitch, work 4 single crochets. Chain 1, turn [4].
- Row 2: Skip the first stitch, work 3 single crochets. Chain 1, turn [3].
- Row 3: Skip the first stitch, work 2 single crochets. Chain 1, turn [2].
- Row 4: Skip the first stitch, work 1 single crochet [1]. Fasten off and weave the dark charcoal tail deep inside the body through the zipper opening.
Antennae (Make 2)
The pattern gives a simple chain antenna. My photo shows antennae with a round bobble at the tip, so I made each antenna as described below, using a general maker method for the bobble since the pattern gives no counts for it.
- With dark charcoal yarn, chain 8.
- Starting in the third chain from the hook, work 1 single crochet.
- Slip stitch in the remaining 5 chains back to the starting end.
- For the bobble tip: work a small circle in the round at the top of the antenna, crocheting until the bobble reaches your preferred size, stuff lightly, and close. On mine the bobble tips are round and plump, sitting at the very top of each antenna.
- Fasten off, leaving a long tail for sewing.
- Sew the antennae to the top of the head, leaving exactly 4 stitches of space between them.
Wings (Worked as One Continuous Piece)
- With off white yarn, chain 25. Starting in the second chain from the hook, work 24 single crochets [24].
- Row 2: Work 24 single crochets [24].
- Row 3: Work 1 decrease, 20 single crochets, 1 decrease [22].
- Row 4: Work 1 decrease, 18 single crochets, 1 decrease [20].
- Row 5: Work 1 decrease, 16 single crochets, 1 decrease [18].
- Row 6: Work 18 single crochets [18].
- Row 7: Work 1 increase, 16 single crochets, 1 increase [20].
- Row 8: Work 1 increase, 18 single crochets, 1 increase [22].
- Row 9: Work 22 single crochets [22].
- Wing border: do not fasten off. Single crochet evenly all the way around the entire perimeter of the wing piece, working 2 single crochets at every corner. Fasten off, leaving a long tail of about 40 cm.
- Gathering: thread the long tail onto your needle and sew a running stitch straight down the centre of the piece at the 11th and 12th stitch mark. Pull the yarn tight to bunch the centre into a bow shape. Wrap the yarn around the gathered centre 2 or 3 times and knot securely.
- Sew the gathered centre firmly to the upper back of the bee so the wings extend out to each side, as on mine.
- Optional: place a small drop of liquid silicone or hot glue under the middle of each wing flap and press it flat against the back panel to keep the wings open rather than flopping forward.
Expanded Technique Notes
Intarsia versus carrying: do not carry the dark charcoal yarn across the back of yellow rows. Let each colour section hang at the wrong side and pick it up only when needed. Carrying creates bulk and a visible colour shadow through the front.
Decreasing at the start of a row: the skip method described in this pattern gives a slanting edge rather than a true decrease, so your edges will angle rather than stay perfectly straight. This is correct for this pattern and gives the oval its shape.
Evening out the border: work the single crochet border at the same tension as the panels. Too loose and the edge ripples; too tight and it pulls the oval into a football shape.
Zipper installation: pin the zipper in place first and test that it opens fully before sewing. On my bee the yellow zipper pull matches the body, so the zipper reads as a design detail rather than a seam.
Stuffing behind eyes: push stuffing away from the eye area when closing up, leaving just the eye and its washer pressed against the front panel. This creates the slight indent that gives ragdoll style faces their soft expression.
FAQ
Can I make this without the zipper and just stuff it like a cushion doll?
Yes. Simply join the panels all the way around, stuff through the last few stitches before closing, and finish with an invisible join. The zipper step is the main change from the original stuffed doll version.
What does intarsia mean and is it hard?
Intarsia means each colour section uses its own yarn supply rather than one yarn carried across the back. It looks complex in the instructions but in practice it is three balls of yarn hanging off the back of your work. The only skill is the colour join twist, which you practise in the first couple of rows and it quickly becomes automatic.
My panels are different sizes. What went wrong?
Row tension is the most likely cause. If your increases are all in the right places, check that your chain 1 turns are consistent. A tighter chain turn pulls the row shorter. Blocking the panels under a damp cloth before joining brings them to the same size quickly.
Can I use a different hook or yarn weight?
Any smooth yarn with a hook that gives you a dense fabric works fine. Switching to a heavier yarn makes a larger bee and means the zipper length needs to increase to match. Test the panel size before cutting the zipper.
My wings keep flopping onto the front face. How do I fix that?
A small dot of hot glue or fabric glue under each wing flap, pressed against the back panel, is the most reliable fix. You can also sew an extra stitch or two through each flap to anchor it at an angle that keeps it upright.





