Crochet Raccoon Amigurumi Pattern With Striped Tail
Rust brown and charcoal rings circle the tail of the crochet raccoon amigurumi, and the same brown fills a sweater style torso above dark grey legs. Woodland nursery shelves and birthday gift bags welcome a cheeky amigurumi raccoon that balances upright on its own cream feet.
Kids who sneak snacks after bedtime will recognise themselves in the Crochet Raccoon Amigurumi, paw raised to its cheek as if caught. Camp counsellors can use it as a cabin mascot. Hikers keep one beside their field guides. Teachers planning woodland lessons can seat a Crochet Raccoon Amigurumi in the reading corner.
Crochet Raccoon Amigurumi
Building the head from a flat foundation chain and shaping it with increases along both sides gives this raccoon its wide, rounded face before a single decrease row runs. I crocheted mine in charcoal grey for the head and body, warm brown for the eye patches and ear tips, and cream for the snout, feet, and inner ears. Each eye patch carries a white trim at its base and sits right over a large black safety eye. My crochet raccoon amigurumi has a striped tail closed flat at the tip, round grey and cream feet, and plump arms. Every piece is worked separately and sewn on, so you can position each one before committing to a stitch.
Materials and Tools
- Charcoal grey yarn for the head, body, upper arms, and tail stripes. Mine is a medium grey with a slight cool tone.
- Warm brown yarn for the ear outer layer, eye patches, body stripes on the sweater section, and upper legs.
- Cream or off white yarn for the snout, inner ear, feet, lower arms, and the eye patch white trim.
- Black yarn for the ear edge detail and nose embroidery.
- A crochet hook suited to your yarn, sized slightly smaller than the label recommends for a tight, stuffing proof fabric.
- Fiberfill stuffing.
- Large black safety eyes with white rings. My photo shows oversized domed eyes that give the raccoon its expressive look.
- Yarn needle and scissors.
- Optional: red yarn for a scarf and sweater section.
Technique Notes and Tips
For a flat foundation chain start on the head, chain the number stated, then start your single crochets in the second chain from the hook and work along one side, increase at each end, then work back along the other side. This oval start gives the face its width before the increase rows begin.
The eye patches are worked in rows and end in a point. Attaching the white trim along the bottom straight edge before sewing the patch to the face gives a clean cream border at the lower edge, exactly as on mine.
The tail uses a stripe pattern of alternating rounds. Keep a stitch marker at the start of each round because the colours can make the beginning of the round hard to spot.
When joining the legs to begin the body, line both legs up with their toes pointing the same direction before you crochet around them. There are no joining chains, so the legs meet directly.
Stuff each piece before the opening becomes too small. The tail is closed flat at the end, so stop stuffing a round or two before Round 21 and flatten the piece before joining the sides.
The Pattern
Part 1: The Head
- Use charcoal grey yarn.
- Foundation: chain to begin, and starting from the second chain, work 1 single crochet (sc) in the next stitch, 1 single crochet in the last chain, then continue as follows.
- Row 1: sc, increase (inc), sc, sc, inc, sc, sc, inc, sc, inc, sc, sc, inc [28 stitches].
- Row 2: (sc, inc, sc) 4 times, sc, sc, inc, sc, (sc, inc) 2 times [see Gap Check: count not given in source].
- Row 3: (2 sc, inc, sc) 4 times, 2 sc, inc, sc, (3 sc, inc) 2 times [40 stitches].
- Row 4: (3 sc, inc, sc) 4 times, 3 sc, inc, sc, (4 sc, inc) 2 times [46 stitches].
- Row 5: (4 sc, inc, sc) 4 times, 4 sc, inc, sc, (5 sc, inc) 2 times [52 stitches].
- Row 6: (5 sc, inc) 7 times, sc [60 stitches].
- Rows 7 to 13: work 1 single crochet in each stitch around [60 stitches each row].
- Row 14: (8 sc, decrease (dec)) 6 times [54 stitches].
- Row 15: (7 sc, dec) 6 times [48 stitches].
- Row 16: (6 sc, dec) 6 times [42 stitches].
- Row 17: (5 sc, dec) 6 times [36 stitches].
- Row 18: (4 sc, dec) 6 times [30 stitches].
- Row 19: (3 sc, dec) 6 times [24 stitches].
- Row 20: (2 sc, dec) 6 times [18 stitches].
- Row 21: (1 sc, dec) 6 times [12 stitches].
- Stuff the head firmly before the opening becomes too small, then continue.
- Row 22: 6 decreases [6 stitches]. Fasten off and close.
Part 2: The Ears (Make 2)
- At the start of each row, chain 1.
- Row 1: Chain 8. Starting from the second chain from the hook, work 7 single crochets. Chain 1 and turn.
- Row 2: dec, 3 sc, dec [5 stitches].
- Row 3: 5 sc [5 stitches].
- Row 4: dec, 1 sc, dec [3 stitches].
- Row 5: 1 sc, dec [2 stitches].
- Row 6: dec [1 stitch].
- Work single crochets all the way around the outer edge of the triangle to smooth it.
- Edge detail: attach brown yarn at all 3 corners. Work 2 single crochets in each corner stitch and 1 single crochet in each stitch along the rest of the edge; on my ears the brown edge runs around the outside and the grey sits in the centre, giving the tipped ear look visible in the photo.
Part 3: The Arms (Make 2)
- Round 1: make a magic ring with 6 single crochets [6 stitches].
- Round 2: increase in each stitch 6 times [12 stitches].
- Round 3: (1 sc, inc) 6 times [18 stitches].
- Rounds 4 to 5: single crochet around [18 stitches each].
- Round 6: (1 sc, dec) 6 times [12 stitches].
- Switch to grey yarn.
- Rounds 7 to 8: single crochet around [12 stitches each]; on my raccoon the lower arm is cream and the upper arm is grey, matching this colour break.
Part 4: The Tail
- Round 1: make a magic ring with 6 single crochets [6 stitches].
- Round 2: increase in each stitch 6 times [12 stitches].
- Round 3: (1 sc, inc) 6 times [18 stitches].
- Round 4: (2 sc, inc) 6 times [24 stitches].
- Switch to brown yarn for the stripe pattern. Alternate 2 rounds brown and 3 rounds grey throughout.
- Round 5: single crochet around in brown [24 stitches].
- Rounds 6 to 19: single crochet in each stitch following your stripe pattern [24 stitches each]; keep a stitch marker at the round start so the stripe changes land consistently.
- Round 20: (2 sc, dec) 6 times [18 stitches].
- Round 21: flatten the opening by folding the piece in half and join both sides together with 9 single crochets to close the tail flat.
Part 5: The Legs and Body
- Start the legs in cream yarn.
- Round 1: make a magic ring with 6 single crochets [6 stitches].
- Round 2: increase in each stitch 6 times [12 stitches].
- Round 3: (1 sc, inc) 6 times [18 stitches].
- Round 4: (2 sc, inc) 6 times [24 stitches].
- Round 5: work in back loops only, single crochet around [24 stitches]; working in back loops here creates a visible ridge that marks the sole edge on the foot.
- Round 6: single crochet around [24 stitches].
- Round 7: (6 sc, dec) 3 times [21 stitches].
- Round 8: (5 sc, dec) 3 times [18 stitches].
- Round 9: switch to grey yarn. (4 sc, dec) 3 times [15 stitches].
- Round 10: (4 sc, inc) 3 times [18 stitches].
- Round 11: (5 sc, inc) 3 times [21 stitches].
- Rounds 12 to 13: single crochet around [21 stitches each].
- Round 14: (6 sc, inc) 3 times [24 stitches].
- Round 15: single crochet around [24 stitches].
- Make both legs to this point, stuffing firmly, before joining them into the body.
- Joining: place both legs next to each other. Without any joining chains, crochet 24 stitches from the first leg and 24 stitches from the second leg to join them [48 stitches].
- Rounds 16 to 22: single crochet around [48 stitches each].
- Switch to brown yarn for the body stripes if you are adding them. Optional: attach red yarn at this point for a sweater effect.
- Rounds 23 to 25: single crochet around [48 stitches].
- Round 26: (6 sc, dec) 6 times [42 stitches].
- Rounds 27 to 29: single crochet around [42 stitches].
- Round 30: (5 sc, dec) 6 times [36 stitches].
- Rounds 31 to 34: single crochet around [36 stitches].
- Round 35: (4 sc, dec) 6 times [30 stitches].
- Round 36: single crochet around [30 stitches].
- Round 37: (3 sc, dec) 6 times [24 stitches].
- Switch to grey yarn.
- Round 38: single crochet around [24 stitches]. Fasten off, leaving a long tail for joining to the head.
Part 6: The Scarf (Optional)
- Use red or any contrasting yarn if you want a scarf.
- Chain 5, then work 4 single crochets in rows back and forth until the strip reaches a length that wraps comfortably around the neck. Fasten off.
Part 7: The Snout
- Use cream yarn.
- Round 1: make a magic ring with 7 single crochets [7 stitches].
- Round 2: increase in each stitch 7 times [14 stitches].
- Round 3: (1 sc, inc) 7 times [21 stitches].
- Round 4: single crochet around [21 stitches].
- Round 5: (1 sc, dec) 7 times [14 stitches]. Fasten off, leaving a long tail for sewing. Do not stuff the snout; it sews on flat against the face.
Part 8: The Eye Patches (Make 2)
- Use brown yarn.
- Row 1: chain 7, starting from the second chain from the hook, work 6 single crochets. Turn.
- Row 2: 1 decrease, 4 sc [5 stitches].
- Row 3: 5 sc [5 stitches].
- Row 4: 1 decrease, 3 sc [4 stitches].
- Row 5: 2 decreases [2 stitches].
- Row 6: 1 decrease [1 stitch].
- White trim: attach cream yarn at the foundation chain edge. Along that bottom edge work 1 increase, 5 sc, 1 increase; this cream border sits at the lower edge of each eye patch as visible on mine.
Part 9: Assembly
- Eye patches and eyes: position both eye patches on the face with the cream trim facing downward and the pointed tip angling outward toward each ear. Insert the safety eyes through the centre of each eye patch before sewing the patches down so the washer locks both the eye and the patch in place.
- Snout: centre the snout below the eye patches and sew it flat to the face. Embroider a small black oval nose at the centre top of the snout and a short mouth line below it.
- Ears: sew one ear to each side of the top of the head, angling them slightly outward with the brown edge visible.
- Body to head: sew the body to the base of the head, stuffing the body firmly before closing.
- Arms: sew one arm to each side of the upper body, positioned so the cream lower arm faces forward. On my raccoon the arms sit at the chest level and angle slightly forward.
- Tail: sew the flat closed end of the tail to the lower back of the body so the tail curves out behind.
- Scarf (optional): wrap the scarf around the neck and tack with a stitch to hold.
FAQ
Can I use a different colour instead of brown?
Yes, and you can follow the plain pattern's grey and black colourway for a more natural raccoon look. My version uses warm brown as the main accent colour instead. The structure stays identical whichever colours you choose.
When should I insert the safety eyes?
Insert them before Round 14 of the head, while the opening is still wide enough to push the washers on from inside. If you plan to use the eye patches, pin the patches in position first to confirm eye placement before committing.
My tail stripes do not line up. What happened?
Spiral amigurumi rounds drift slightly at the join. Keep a stitch marker in the very first stitch of each round and make every colour change at that exact point. A drift of one or two stitches is nearly invisible on the finished tail.





