Crochet Pumpkin Jack o Lantern Free Pattern

Perched beside a candy bowl, the crochet jack o lantern pumpkin greets trick or treaters with a jagged, notched smile and a bumpy lime green stem. Two or three amigurumi pumpkins grouped with small crochet animals on a tray make an easy Halloween centrepiece.

Triangular eyes, a stitched grin, and a green stem define this Crochet Jack o Lantern Pumpkin. This compact Halloween project suits beginners seeking a simple seasonal make, with a recognizable pumpkin face that brings handmade character to a festive display.

Crochet Jack o Lantern Pumpkin

A flat ribbed rectangle of half double crochet becomes a round stuffed pumpkin once you seam the short ends, cinch the top and bottom, and pull yarn wrap lines around the outside to form the segments. My version uses bright orange yarn worked in back loop only rows to build the ribbed texture, a short green crochet stem curled at the top, and a classic Jack o Lantern face cut from dark navy felt and glued to the front. Held in the hand, the finished crochet Jack o Lantern pumpkin sits roughly palm-sized and reads clearly from across a room.

Beginner Technique Notes

Half double crochet (hdc) is the only stitch used for the pumpkin body, which makes this a great early project if you have only just learned to crochet beyond chains. Here is what each technique means:

  • Chain (ch): a row of linked loops that forms the starting foundation row of your panel.
  • Half double crochet (hdc): insert your hook, yarn over, pull through, then yarn over and pull through all three loops at once. It is slightly taller than a single crochet and gives the ribbed panel a nice firm body.
  • Back loop only (BLO): inserting your hook under just the back strand of each stitch instead of both strands. Working BLO creates the visible horizontal ridges you can see running across the pumpkin in my photo, and it also makes the fabric slightly stretchy so it wraps around a stuffed shape without pulling.
  • Gathering and cinching: threading a length of yarn in and out of the edge stitches and then pulling tight to close an opening, the same way you would close the top of a drawstring bag.
  • Yarn wrapping for segments: after the pumpkin is stuffed and closed, lengths of yarn are pulled firmly from top to bottom around the outside to indent the fabric into the familiar pumpkin lobe shapes. Take your time with this step and pull each wrap to the same tension so the lobes come out even.
  • Felt applique: black felt is stiff enough to hold a cut shape cleanly and glue attaches it without any stitching. Tweezers help position small pieces precisely before the glue sets.

If BLO rows are new to you, practice on a small swatch first. After a few rows you will feel the rhythm of finding the back loop quickly and your tension will even out.

Materials and Tools

  • Orange yarn for the pumpkin body (the pattern uses a 2.50 mm hook, so a fine weight cotton works well)
  • Green yarn for the stem
  • 2.50 mm crochet hook
  • Dark navy or black felt sheet for the face
  • Craft glue and tweezers for attaching the felt
  • Polyester fiberfill stuffing
  • Yarn needle and scissors

The felt face in my version is dark navy rather than solid black, which you can see clearly in the photo; it still reads as a classic Jack o Lantern face at a glance.

Difficulty and Time

This is a beginner friendly project. The whole body is flat rows, no working in the round required, and the only shaping comes from gathering and wrapping after construction. In my experience the panel and stem take under two hours. Assembly and the felt face add another thirty minutes or so.

The Pattern

Pumpkin Body (Orange)

  • Foundation: Chain 28 [28 ch]; this starting chain sets the width of your ribbed panel and determines how tall the finished pumpkin will be once seamed into a tube.
  • Row 1: Starting in the second chain from your hook, work 1 half double crochet (hdc) in each remaining chain across, then turn your work [26 hdc].
  • Row 2: Chain 2, then work 26 hdc in the back loop only (BLO) across the row, then turn your work [26 BLO hdc]; the back loop only instruction is what creates the horizontal ridge lines running across my pumpkin in the photo, so make sure you are catching only the back strand of each stitch.
  • Rows 3 to 29: Repeat Row 2, working chain 2 and then 26 BLO hdc each time, for a total of 29 ribbed rows; fasten off when complete, leaving a long tail for sewing; by the end you will have a tall rectangular panel covered in neat horizontal ridges.

Assembly and Shaping

  • Seaming: Fold the finished rectangular panel in half so the two short ends meet, then use your yarn needle and the long tail to sew those short ends together to form a tube; the seam will become the back of the pumpkin.
  • Gathering the top: Thread a length of orange yarn onto your needle and weave it in and out all the way around the top opening edge, then pull firmly to cinch the opening closed and secure with several knots; the top will pucker into a tight gathered centre.
  • Stuffing: Fill the tube firmly with polyester fiberfill through the bottom opening; pack it in firmly enough that the pumpkin holds a round shape rather than a flat oval.
  • Closing the base: Weave your needle around the bottom opening edge the same way as the top, pull tight to cinch closed, and secure with knots; the pumpkin is now a closed stuffed ball.
  • Pumpkin segments: Cut a long length of orange yarn and thread it onto your needle; bring it from the very top centre down through the pumpkin to the bottom centre, pulling snugly to create an indent, and tie off securely; repeat this wrap at evenly spaced points around the circumference to divide the surface into distinct lobe segments; on my pumpkin you can see five or six clear lobes from the front view.

Stem (Green)

  • Foundation: Chain 14 [14 ch].
  • Stem row: Starting in the second chain from your hook, work 1 hdc in each remaining chain across [12 hdc]; fasten off, leaving a tail for sewing.
  • Attaching the stem: Curl the green piece slightly so it has a natural curve, then sew it securely to the top centre of the pumpkin with the remaining yarn tail; on my gnome the stem sits upright with a gentle curve, giving it the look of a real pumpkin stem.

Face Details (Dark Navy Felt)

  • Cutting the face: Using scissors, cut two small triangular eyes, a small triangular nose, and a wide smiling mouth with uneven teeth from the dark navy felt sheet; the classic Jack o Lantern face on my pumpkin has two angular triangular eyes sitting above a broad grinning mouth with two prominent upper teeth, all cut freehand.
  • Gluing: Apply a small amount of craft glue to the back of each felt piece and use tweezers to position them precisely on the front centre of the pumpkin; hold each piece in place for a moment until the glue grabs, then leave it to dry fully before handling; on my pumpkin the face is centred between two segment lines so it sits flat against the fabric.

FAQ

  • Do I need to know how to crochet in the round for this pattern? No, the entire body is worked in flat rows and then seamed together; if you can chain and work hdc across a row you have everything you need.
  • Why do my rows look loopy rather than ridged? This usually means you are picking up both loops of each stitch rather than the back loop only; on the next row look for the strand that faces away from you and insert your hook under just that one.
  • How do I stop the felt face from peeling off? Use a generous amount of craft glue and press each piece firmly; letting the pumpkin rest face-down on a flat surface while the glue dries fully helps the felt bond evenly.
  • My pumpkin looks more oval than round. What went wrong? This usually means either the stuffing is too light or the segment wraps are pulling unevenly; add more fiberfill and re-wrap the segments a little tighter, then adjust the top and base gathers.
  • Can I embroider the face instead of using felt? Yes, embroider the face outlines with dark yarn using a backstitch or satin stitch before you close the bottom, while the pumpkin is still accessible; felt is simply the faster option.

Every row of this pumpkin is the same stitch, so once Row 2 clicks you can work on autopilot and still end up with a Halloween decoration you will want to make in multiples.

0 Shares

Leave a Reply

Your email address will not be published. Required fields are marked *