Crochet Heart Turtle Free Pattern Plush Beginner Friendly

Pastel bedrooms and dorm shelves suit a crochet heart turtle that lies flat on its belly, as if it just paddled ashore. Sea turtle fans get a squishy twist on the classic crochet turtle pattern, one that fills two cupped hands and doubles as a nap buddy.

Valentines gifting is where the crochet heart turtle plush earns its place, red ruffle and speckled shell doing the theme without a single printed word. February craft fairs sell them. Make the crochet heart turtle plush in advance and it still reads right at an anniversary or a spring baby shower.

Crochet Heart Turtle Plush

Shell takes the shape of a heart instead of the usual dome, worked in speckled cream with flecks of pink and green running through it. Around that heart sits a red ruffled border standing proud of the surface. The head, four flippers, and tail are all pale pink chenille, flat and wide, spreading out from under the shell. Two black eyes sit high on the head. Nothing else marks the face. Pieces come to a shell top, the ruffle edging, a head, four flippers, and a tail. Working the ruffle around a heart outline takes more attention than the flippers, since the curves and the point need even spacing.

Beginner Technique Notes

Read these before you begin. You will use all of them.

  • Magic ring. Wrap your yarn around two fingers to form a loop, pull a new loop of yarn through it, then chain one to secure. Work your stitches into the centre of that loop, then pull the tail to close the hole. If the magic ring feels difficult, chain 2 and work your stitches into the second chain from your hook instead. The centre hole will be slightly larger but the piece will still work.
  • Continuous rounds. This pattern works in a spiral without joining at the end of each round or chaining at the start of the next. You work continuously, round into round. Use a stitch marker placed in the first stitch of your current round and move it up as you go. Losing your place is the most common beginner mistake, and the marker prevents it.
  • Increases. An increase means you work two single crochet stitches into the same stitch. It adds one stitch and makes the piece grow wider. When the pattern says "inc," you work two sc into one stitch.
  • Invisible decrease. Insert your hook into the front loop only of the next stitch, then into the front loop only of the stitch after that. Yarn over and pull through both loops, then yarn over and pull through the remaining two loops. It sits flatter than a standard decrease and looks much cleaner on the outside of the piece. Use it throughout for best results.
  • Marking the round. Every time you begin a new round, move your stitch marker into the first stitch of that round. Count your stitches at the end of every round until you are confident in your tension. On a piece with as many sections as this turtle, a missed stitch or extra stitch compounds across rounds and becomes visible by the time you are decreasing.

Pieces List

Eight separate pieces, plus two surface additions.

  • Head: make 1
  • Fins: make 4, all worked identically
  • Belly: make 1, worked flat in rows
  • Heart shell humps: make 2, then joined into 1 shell
  • Shell border and ruffles: worked onto the finished shell as a surface addition
  • Tail: worked as a chain attachment during assembly, not a separate piece

Materials and Tools

  • Michael's Sweet Snuggles Light yarn in Antique Blossom
  • Bernat Baby Blanket yarn in Baby Pink
  • Figis Posh yarn in Raspberry Sorbet
  • 5 mm crochet hook
  • 20 mm safety eyes
  • Polyfill stuffing
  • Stitch marker
  • Embroidery needle
  • Scissors

The pattern uses three specific yarns. If you substitute, note that Baby Blanket yarn is a very chunky, low-pill yarn that behaves differently from standard DK or worsted. Match the weight class rather than the brand if substituting, and swatch first.

Safety Eye Timing

  • Insert the 20 mm safety eyes after round 8 of the head, before beginning round 9
  • Position them between rounds 4 and 5 as marked, approximately 7 stitches apart, which is where they should sit on the finished face
  • Press the washer firmly onto the post from inside the piece; once round 9 begins the opening narrows and access becomes difficult
  • For toys going to children under three, embroider the eyes in black yarn instead and skip safety eyes entirely; 20 mm plastic eyes are a serious choking risk for very small children

The Pattern

Head

  • Round 1: 6 sc in magic ring [6]
  • Round 2: 6 increases around [12]
  • Round 3: 1 sc, increase, repeat 6 times [18]
  • Round 4: 2 sc, increase, repeat 6 times [24]
  • Round 5: 3 sc, increase, repeat 6 times [30]. Checkpoint: a flat disc about 9 to 10 cm across; if it ruffles at the edge your tension is too loose, if it cups your tension is too tight.
  • Round 6: 30 sc around [30]
  • Round 7: 30 sc around [30]
  • Round 8: 30 sc around [30]. Insert safety eyes now between rounds 4 and 5 on the face, approximately 7 stitches apart, before beginning round 9. Checkpoint: with eyes placed, the face should read clearly as a head rather than a plain disc.
  • Round 9: 3 sc, decrease, repeat 6 times [24]
  • Round 10: 2 sc, decrease, repeat 6 times [18]. Checkpoint: the piece should be clearly doming now, curving upward from the eye area toward the back of the head.
  • Round 11: 18 sc around [18]
  • Stuff the head firmly
  • Flatten the opening and work 9 sc through both sides to close

Fins (make 4)

  • Round 1: 6 sc in magic ring [6]
  • Round 2: 6 increases around [12]
  • Round 3: 1 sc, increase, repeat 6 times [18]
  • Round 4: 2 sc, increase, repeat 6 times [24]. Checkpoint: a flat circle about 7 cm across; it should lie completely flat with no cupping.
  • Fold the circle in half
  • Work 12 sc through both sides to form a half circle fin

Still learning how amigurumi patterns work? That's totally okay, follow the video tutorial below and check the written pattern as you go!

Belly

  • Chain 13
  • Row 1: 12 dc starting in the second chain from the hook, chain 1 and turn [12]
  • Row 2: 3 dc, dc decrease, 2 dc, dc decrease, 3 dc, chain 1 and turn [10]
  • Row 3: 2 dc, dc decrease, repeat twice, 2 dc, chain 1 and turn [8]
  • Row 4: dc decrease, 4 dc, dc decrease, chain 1 and turn [6]
  • Row 5: 2 dc, dc decrease, 2 dc, chain 1 and turn [5]
  • Row 6: dc decrease, 1 dc, dc decrease, chain 1 and turn [3]. Checkpoint: the belly should now be a clear triangle shape, wide at the top and narrowing to a point at the bottom.
  • Border the triangle with single crochet as follows:
  • Work 3 sc across the point
  • Work 10 sc down the side
  • Work 3 sc in the corner
  • Work 10 sc across the top
  • Work 3 sc in the next corner
  • Work 10 sc down the final side

Assembly and Attachments

  • Begin from the bottom point of the belly piece
  • Work 2 sc then attach a back fin by crocheting 4 sc through both the fin and belly
  • Work 3 sc then attach a front fin using 4 sc through both layers
  • Work 2 sc then attach the head using 9 sc through both head and belly
  • Work 2 sc then attach the second front fin with 4 sc
  • Work 3 sc then attach the second back fin with 4 sc
  • Work 2 sc then chain 5 to create the tail
  • Slip stitch back into the turtle to secure the tail

Heart Shell

  • Round 1: 6 sc in magic ring [6]
  • Round 2: 6 increases around [12]
  • Round 3: 1 sc, increase, repeat 6 times [18]
  • Round 4: 18 sc around [18]
  • Round 5: 18 sc around [18]. Checkpoint: a small dome roughly 5 cm across at this point; it should hold its curve and not lie flat.
  • Fasten off the first hump
  • Repeat rounds 1 to 5 for the second hump but do not fasten off
  • Join the two humps with 1 single crochet
  • Work 36 sc around both pieces [36]. Checkpoint: joined, the two humps should form a clear heart outline when viewed from above; if they lie flat against each other rather than sitting side by side, the join stitch needs to be repositioned.
  • Continue rounds of single crochet, decreasing by 3 stitches each round following this pattern:
  • Work 10 sc then 1 decrease, repeat to end of round
  • Next round: work 9 sc then 1 decrease, repeat to end of round
  • Continue reducing the sc count before each decrease by 1 on every round
  • Continue until reaching 1 sc then decrease
  • Stuff the shell while working the final rounds, adding filling gradually so the heart shape is maintained
  • Fasten off and close the opening

Shell Border and Ruffles

  • Surface crochet single crochet around the outside edge of the heart shell
  • Chain 3 then sc into the next stitch
  • Repeat this pattern around the full border to create the ruffled edge

Final Assembly

  • Thread the yarn tail from the belly piece onto the embroidery needle
  • Align the triangle belly piece against the flat underside of the heart shell
  • Sew around the edges to join the two pieces and complete the turtle

Stuffing

  • The head needs to be firmly stuffed so it holds its rounded shape when attached and handled.
  • The fins are folded flat and sewn that way; do not stuff them. A stuffed fin would be thick and awkward at the join.
  • The heart shell wants moderate stuffing, added gradually as you work the final decrease rounds. Too much stuffing at once distorts the heart shape before the decreases can bring it back in. Add a little, work a few rounds, add a little more.
  • Over-stuffing in the shell shows when the heart bumps flatten and the piece becomes a plain ball rather than a two-lobed shape. If that happens, remove stuffing until the heart outline is visible again from above.
  • The belly is flat and gets no stuffing.

Yarn Substitution and Size Scaling

  • The three named yarns vary in weight and texture; Sweet Snuggles Light is a light worsted, Baby Blanket is a super bulky chenille-style yarn, and Posh is a midweight option. If substituting, match the weight class for each specific yarn rather than using one weight throughout.
  • Swapping all three for the same weight of standard acrylic will give a smaller, flatter finished turtle with less textural contrast between pieces.
  • Scaling up is possible by moving one weight class higher across all three yarns; the stitch counts stay the same and the finished size increases by roughly 20 to 30 percent.

FAQ

  • I have never done a magic ring before. Is there an easier way to start? Yes. Chain 2 and work your starting stitches into the second chain from the hook. You will have a small hole at the centre instead of a fully closed ring, but you can pull it nearly closed with the yarn tail. Most beginners find this easier.
  • What does it mean to work increases and decreases through the front loop only? For an invisible decrease specifically, you only insert your hook into the front loop of each stitch rather than both loops. It makes the decrease sit flatter on the outside of the piece. Regular increases use both loops as normal.
  • My disc is ruffling at the edge instead of lying flat. What went wrong? Your tension is probably too loose, or you have worked too many increases. Check your stitch count at the end of the increase round before continuing. If the count is correct and the disc still ruffles, try going down one hook size.
  • The safety eye instruction appears late in the pattern. When should I actually insert them? After round 8 of the head, before round 9. The placement on the face is between rounds 4 and 5, which is where they will sit visually, but you physically insert them while the piece is still open and accessible.
  • Can I make this without the three specific yarns listed? Absolutely. Match the weight and texture as closely as you can for each yarn in the list rather than picking one generic yarn for everything, because the contrast between the different yarn types is part of what gives the finished turtle its look.
0 Shares

Leave a Reply

Your email address will not be published. Required fields are marked *