Christmas Reindeer Free Crochet Pattern

Forked antlers and four legs make the Crochet Reindeer Amigurumi one of those requests that comes back every single November. Makers who did it once get asked to make three more before December ends.

Branching antlers rising above a rounded head are what separate this from any other hoofed animal pattern. The body, head, legs, and antlers all work up separately before being joined.

Crochet Reindeer Amigurumi

Ears sit to the sides of the head and need securing firmly. Once stuffed and assembled, the finished piece holds its shape well. The antlers take the most rounds to get right, but they carry the whole look.

 

Crochet Reindeer Amigurumi Pattern Guide

Building this reindeer amigurumi is all about watching simple crocheted pieces come together into a structured, dimensional character. What makes this design especially interesting is how the shaping of the head and body creates natural proportions, while separate parts like the antlers, legs, and scarf bring personality and balance. Instead of relying on complicated techniques, the construction focuses on careful increases and decreases that gradually define the face, torso, and limbs.

Skill Level

Intermediate beginner to intermediate
(Requires understanding of increases, decreases, and basic amigurumi assembly)

Finished Size

Size will depend on yarn thickness and hook size used.

Materials

  • Velvet or teddy yarn in light brown and dark brown
  • Small amount of red felt for the nose
  • 2.5 mm crochet hook
  • 5 mm safety eyes
  • Fiberfill stuffing
  • Yarn needle
  • Scissors

Abbreviations

  • MR = Magic ring
  • SC = Single crochet
  • INC = Increase
  • DEC = Decrease
  • SL ST = Slip stitch
  • HDC = Half double crochet
  • DC = Double crochet

Helpful Notes Before Starting

  • Velvet and teddy yarn can be slippery, so stitch placement may feel less visible. Work slowly and count carefully.
  • Stuff firmly but gradually to maintain shape without distorting stitches.
  • The head shaping relies heavily on increases and decreases placed in specific sections, so stitch counting is very important.
  • Keep tension consistent to avoid uneven shaping, especially in the face area.

Construction Overview

This reindeer is built in separate parts:

  • Head (light brown) with cheek shaping
  • Body (light brown) with attachment point for front legs
  • Front legs (dark and light brown)
  • Back legs (dark and light brown, closed flat)
  • Antlers (dark brown, layered pieces joined together)
  • Ears (simple rounded pieces folded and sewn)
  • Tail (small chain-based shape)
  • Scarf (flat textured strip)

Once all parts are complete, assembly brings everything together into a seated or standing character with balanced proportions.

Original Pattern

HEAD LIGHT BROWN

  • R1: Make a magic ring and crochet 6 single crochet
  • R2: Increase in each stitch around for 12 stitches
  • R3: Alternate 1 single crochet and 1 increase around for 18 stitches
  • R4: Work 1 single crochet, 1 increase, 1 single crochet around for 24 stitches
  • R5: Single crochet in each stitch around
  • R6: Single crochet in each stitch around
  • R7: Crochet 6 single crochet, 3 increases, 6 single crochet, 3 increases, 6 single crochet for 30 stitches
  • R8: Single crochet in each stitch around
  • R9: Single crochet in each stitch around
  • R10: Single crochet in each stitch around
  • R11: Crochet 6 single crochet, 3 decreases, 6 single crochet, 3 decreases, 6 single crochet for 24 stitches
  • R12: Alternate 2 single crochet and 1 decrease around for 18 stitches
  • Finish by stuffing firmly, shaping the cheeks, and closing the opening

FRONT LEGS DARK AND LIGHT BROWN

  • R1: With dark brown, make a magic ring and crochet 6 single crochet
  • R2: Alternate 1 single crochet and 1 increase around for 9 stitches
  • R3: Change to light brown and single crochet in each stitch
  • R4: Single crochet in each stitch
  • R5: Single crochet in each stitch
  • R6: Single crochet in each stitch
  • Finish by lightly stuffing and make two identical legs

BODY LIGHT BROWN

  • R1: Make a magic ring and crochet 8 single crochet
  • R2: Increase in each stitch around for 16 stitches
  • R3: Alternate 1 single crochet and 1 increase around for 24 stitches
  • R4: Crochet 3 single crochet and 1 increase around for 30 stitches
  • R5: Single crochet in each stitch around
  • R6: Single crochet in each stitch around
  • R7: Crochet 3 single crochet and 1 decrease around for 24 stitches
  • R8: Alternate 2 single crochet and 1 decrease around for 18 stitches
  • R9: Crochet 5 single crochet, join first front leg with 4 single crochet through both layers, join second front leg with 4 single crochet, then crochet 5 single crochet
  • R10: Single crochet in each stitch around
  • Finish by stuffing and sewing the head securely to the body

BACK LEGS DARK AND LIGHT BROWN

  • R1: With dark brown, make a magic ring and crochet 6 single crochet
  • R2: Increase in each stitch around for 12 stitches
  • R3: Change to light brown and single crochet in each stitch
  • R4: Alternate 1 single crochet and 1 decrease around for 8 stitches
  • R5: Single crochet in each stitch
  • R6: Flatten the piece and crochet 3 single crochet through both sides to close
  • Finish by making two pieces

ANTLERS DARK BROWN

  • Short piece
  • R1: Make a magic ring and crochet 4 single crochet
  • R2: Single crochet in each stitch and fasten off
  • Long piece
  • R1: Make a magic ring and crochet 4 single crochet
  • R2: Alternate 1 single crochet and 1 increase twice for 6 stitches
  • R3: Single crochet in each stitch
  • Join the short piece to the long piece for 10 stitches total
  • R4: Single crochet in each stitch
  • R5: Crochet 3 single crochet and 1 decrease twice, lightly stuff and fasten off

EARS

  • R1: Make a magic ring and crochet 6 single crochet
  • R2: Increase in each stitch around for 12 stitches
  • Finish by folding in half and sewiءng in place

TAIL

  • Chain 6
    Skip the first chain, then crochet slip stitch, 1 single crochet, 1 double crochet, 1 single crochet, slip stitch

SCARF

  • Chain 40
    Starting in the second chain from the hook, crochet half double crochet in each stitch across

ASSEMBLY

  • Sew the back legs to the sides of the body
  • Attach the antlers to the top of the head and sew the ears just below them
  • Sew the tail to the back of the body
  • Insert safety eyes between rounds 7 and 8 and glue a small red felt circle for the nose
  • Wrap the scarf around the neck and adjust as desired

Construction and Shaping Guidance

Head Shaping Explained

The head is not a simple sphere. The increases early on expand the shape evenly, while the targeted increase section in R7 builds facial width where the cheeks naturally sit. Later decreases in R11 and R12 pull the shape inward, giving a defined snout and soft taper. This is what creates a recognizable animal face rather than a plain ball.

Body Structure and Balance

The body expands at first to create a stable base, then gradually tapers. This narrowing helps the toy maintain proportion when the head is attached. The key moment is R9, where the front legs are integrated directly into the body. This creates strength and prevents loose attachment later.

Leg Construction

  • Front legs remain soft and slightly stuffed so they can bend naturally.
  • Back legs are flattened and closed, giving stability when attached.
  • This contrast helps the figure sit or stand without tipping.

Antlers Assembly Logic

The antlers are built in two parts to create branching structure. The short and long sections are joined to avoid a stiff single rod look. Light stuffing keeps them upright but flexible enough for sewing.

Assembly Tips

  • Attach the head securely before adding antlers to ensure correct alignment.
  • Place safety eyes only after confirming head symmetry.
  • When sewing legs, step back frequently to check balance.
  • The scarf can be adjusted last to hide any uneven neck transitions.

Beginner Notes

  • If stitch counting becomes difficult in velvet yarn, use stitch markers every few rounds.
  • Slight shaping differences are normal and can be corrected with stuffing adjustment.
  • Don’t rush decreases in the head; they define the facial expression.

Troubleshooting

  • Head looks uneven: Check if increases in R7 were evenly spaced. Uneven placement affects cheek shape.
  • Body leans to one side: Usually caused by uneven leg placement or under-stuffing one side.
  • Antlers droop: Add slightly more stuffing or reinforce with tighter stitches in joining rounds.

Finishing Touches

  • The red felt nose adds a soft festive detail that contrasts nicely with the neutral yarn tones. Once the scarf is wrapped, you can adjust folds to give the character more personality, either snug and neat or slightly loose and casual.
3 Shares

Leave a Reply

Your email address will not be published. Required fields are marked *