Crochet Skull Amigurumi Pattern Free - Red Sugar Skull With Flower Eyes
Scarlet yarn turns this crochet skull amigurumi into a bold accent for a coffee table, a Halloween mantel, or a Day of the Dead ofrenda. Sugar skull fans can tuck the hand-sized plushie into a gift bag or line up a few beside candles and marigolds for an autumn display.
Your shelf gets a resident when this Crochet Skull Amigurumi stares back with flower eyes and a stitched grin. It looks surprised by everything, a little nosy, never spooky. Makers who like quirky characters will enjoy giving the Crochet Skull Amigurumi a spot on the desk, where its curious face starts conversations.
Crochet Skull Amigurumi
Thirty six stitches at the widest round give the head its rounded dome before steady decreases pull it into a narrow jaw. I worked mine in bright red cotton, then added two white flower eyes with black centers and a small white triangle nose. Black thread forms the stitched mouth, crossing the jaw with four short teeth. Making a crochet skull amigurumi like this takes only single crochet, a few petal stitches, and some careful stuffing. Eyes and nose go on after the body closes, so you can adjust placement freely. Beginners who know the magic ring can finish one in an evening.
Materials and Tools
- Medium weight (4) yarn in red for the skull body
- Medium weight (4) yarn in white for the flower petals
- Medium weight (4) yarn in black for the flower eye centers
- 5.0 mm crochet hook for the skull body
- 4.5 mm crochet hook for the flower eyes
- Black embroidery thread for the mouth (a strand of black yarn works too)
- A small piece of white felt for the nose, or a little extra white yarn if you prefer a crocheted nose
- Stitch marker
- Yarn needle
- Scissors
- Polyester fiberfill stuffing
- Hot glue gun
I used a smooth cotton for all three colors. It gives crisp, even stitches that keep the skull shape clean and make the flower petals stand out against the red.
Terminology and Abbreviations (US Terms)
- MR: Magic Ring, also called a Magic Circle
- sc: Single Crochet
- inc: Increase, which means 2 single crochet in the same stitch
- dec: Normal Decrease, which means single crochet 2 stitches together through both loops
- inv dec: Invisible Decrease, worked through the front loops only
- hdc: Half Double Crochet
- dc: Double Crochet
- sl st: Slip Stitch
- st(s): Stitch(es)
Difficulty and Time
This one sits firmly in the easy range. Most of the body is plain single crochet in the round, and the flower eyes use just three stitch types. In my experience it takes roughly two to three hours from magic ring to final glue dot, with the body taking most of that time. Your pace may differ depending on how quickly you work rounds and how long you spend on placement.
Beginner Technique Notes
- Working in a spiral: amigurumi rounds are not joined, so the stitch marker is the only thing telling you where each round starts. Move it up every round.
- Invisible decrease: insert the hook through the front loop of the next stitch, then the front loop of the following stitch, and finish as a regular single crochet. It leaves a smoother surface than a normal decrease, which matters on Round 13 where the head starts curving in.
- Petal bundle: each flower petal is three stitches worked into one single stitch. Keep your tension even so all six petals come out the same size.
- Embroidering on a stuffed piece: stuff the top first and leave the jaw loose. A soft jaw lets the needle pass through cleanly while you stitch the mouth.
The Pattern
Part 1: The Skull Body
- Use the 5.0 mm hook and red yarn.
- Round 1: Make a magic ring and work 6 sc into it (6 sts). Pull the tail tight so the crown closes with no hole, and place your stitch marker in the first stitch.
- Round 2: inc in every stitch around (12 sts). The piece should lie as a small flat circle.
- Round 3: [inc in the first st, sc in the next st] repeat 6 times around (18 sts). Keep the circle flat; if it starts cupping already, your tension is running tight.
- Round 4: [inc in the first st, sc in the next 2 sts] repeat 6 times around (24 sts). You now have the top of the crown.
- Round 5: [inc in the first st, sc in the next 3 sts] repeat 6 times around (30 sts). The circle should still sit mostly flat at this point.
- Round 6: [inc in the first st, sc in the next 14 sts] repeat 2 times around (32 sts). Only two increases here, so the edge begins to turn upward into a dome.
- Round 7: [inc in the first st, sc in the next 15 sts] repeat 2 times around (34 sts). The sides keep curving gently up.
- Round 8: [inc in the first st, sc in the next 16 sts] repeat 2 times around (36 sts). This is the widest point of the skull, where the flower eyes will later sit.
- Rounds 9 to 12 (4 rounds): sc in every stitch around (36 sts per round). These straight rounds build the full forehead and eye area, and the piece now looks like a deep bowl.
- Round 13: [sc in the next 4 sts, 1 inv dec through the front loops only] repeat 6 times around (30 sts). The opening starts drawing in, forming the cheeks beneath the eyes.
- Round 14: sc in every stitch around (30 sts). One straight round keeps the cheeks from narrowing too fast.
- Round 15: [sc in the next 3 sts, 1 dec through both loops] repeat 6 times around (24 sts). The pattern switches to a normal decrease here, so work through both loops from this round on.
- Round 16: [sc in the next 2 sts, 1 dec] repeat 6 times around (18 sts). You should see the head clearly tapering toward the jaw.
- Round 17: [1 dec, sc in the next 7 sts] repeat 2 times around (16 sts). This sets the width of the jaw, which on my skull is noticeably narrower than the head.
- Rounds 18 to 21 (4 rounds): sc in every stitch around (16 sts per round). These rounds form the straight jaw that holds the mouth; add more rounds here only if you want a longer face, since the pattern calls for exactly 4.
- Cut the yarn and leave a long tail for sewing the bottom closed later.
Part 2: Embroidering the Mouth and Stuffing
- Initial stuffing: firmly stuff the rounded top of the skull with fiberfill and leave the bottom jaw slightly unstuffed for now. Push stuffing into the dome evenly so the forehead stays smooth and round.
- Horizontal mouth line: thread your needle with black embroidery thread, choose the side that will be the front face, and bring the needle from the inside out to make one long horizontal line across the jaw. On my skull this line sits across the middle of the jaw and spans most of its width.
- Teeth lines: loop the thread up and down vertically across the horizontal line to create the teeth, going back and forth until you have the number you want. I made four evenly spaced teeth, which reads clearly at this size without crowding the jaw.
- Tie off: pull both loose ends of the thread to the inside of the skull and knot them together to secure the mouth. Check that the knot sits inside so nothing shows on the face.
Part 3: Closing the Skull
- Final stuffing: add more stuffing into the jaw, right behind the mouth, so the mouth area pushes out firmly. A firm jaw keeps the teeth lines straight and gives the skull its squared chin.
- Sewing it shut: thread your yarn needle with the long red tail and pinch the bottom opening flat. Flatten it side to side so the closed seam runs across the bottom of the chin.
- Stitch across: sew the bottom closed by weaving the needle back and forth through the stitches on both sides of the flattened opening, pulling tightly as you go. A flat seam lets the skull stand upright on a shelf.
- Fasten off: secure the yarn with a knot, push the needle deep into the center of the skull, bring it out through the back to hide the tail, and snip the excess.
Part 4: Flower Eyes (Make 2)
- Use the 4.5 mm hook and start with black yarn.
- Round 1 (center): make a magic ring with black yarn, work 6 sc into it, then sl st into the first sc to join. Fasten off and cut the black yarn; the center should be a small, tight black circle.
- Round 2 (petals): attach white yarn into any stitch from Round 1.
- In that same stitch, work one petal bundle: [1 hdc, 1 dc, 1 sl st].
- Move to the next stitch and repeat the petal bundle [1 hdc, 1 dc, 1 sl st] all in one stitch.
- Repeat the petal bundle in all 6 stitches of the round until you have 6 petals in total. The white petals frame the black center so it reads as a small star shape, just like on my skull.
- Finish the eye: after the last sl st, cut the yarn and pull the tail to the back. Knot the white and black tails together tightly on the back and trim them; the back stays hidden once the eye is attached.
Part 5: Final Assembly
- Nose: make a small white triangle for the nose. Cutting it from white felt is the quickest route; a small crocheted triangle in the white petal yarn also works if you want it to match the yarn texture of the eyes.
- Glue the eyes: heat up your hot glue gun and glue the two flower eyes onto the widest part of the face, above the cheeks and well above the mouth. On my skull the eyes are large and spaced apart, each one reaching close to the side edge of the head.
- Glue the nose: glue the white triangle between the eyes and slightly below them, point facing down, so it sits centered above the jaw.
- Sewing option: if you left long tails on the eyes, you can sew them on instead of gluing, and you can use felt for the eyes entirely if you prefer not to crochet them.
- Sculpting (optional): lightly pinch and mold the sides of the jaw with your fingers to give the skull a sharper, more defined jawline.
- Your crochet skull amigurumi is now complete.
Tips and Troubleshooting
- Count your stitches at the end of Round 8. Everything above depends on reaching 36, and a missed increase shows up as a lopsided dome.
- Mark the face side before you embroider. I lined my mouth up with the side opposite the round's starting point so the slight color jog from the spiral sits at the back.
- Do not overstuff the dome before stitching the mouth. Too much stuffing pushes into the jaw and makes the needle hard to pull through.
- Pin the eyes in place before gluing. Hot glue sets fast, so check the spacing from a few steps away first and move them until both sit level.
- Keep the mouth thread snug but not tight. Pulling too hard puckers the red fabric and bends the teeth lines.
- Use a thin line of glue around the eye edges rather than a big blob in the middle. The petals stay flat against the face instead of curling up at the tips.
Yarn Substitution
Any medium weight (4) yarn will work as long as you keep the hook sizes in proportion. I chose cotton because it holds a firm shape and shows clean stitch definition, which suits a skull's smooth dome. Acrylic gives a slightly softer, fuzzier finish and is easier on the hands for long sessions. If you switch to a lighter yarn, drop down a hook size or two and expect a smaller skull; if you go heavier, size up and expect a chunkier one. Whatever you use, keep the body fabric tight enough that no stuffing peeks through.
Customization Ideas
- Swap the red for classic white or cream for a traditional sugar skull look.
- Work each flower eye in a different petal color for a playful mismatched face.
- Add a small crocheted flower or bow to one side of the crown, sewn on with the tail.
- Stitch the mouth in a contrasting bright thread instead of black.
- Glue a loop of yarn or a keyring to the top to turn it into a hanging ornament.
- Make a set in several colors and line them up for a Day of the Dead display.
Frequently Asked Questions
Is this crochet skull a good project for beginners?
Yes. If you can make a magic ring, single crochet in the round, and work increases and decreases, you can make this skull. The flower eyes add hdc and dc, but only in tiny bundles.
Why does Round 13 use an invisible decrease while later rounds use a normal one?
Round 13 is the first decrease round, right where the head curves in under the eyes, so the invisible decrease keeps that visible area smooth. From Round 15 the pattern switches to a normal decrease through both loops, and I followed it exactly.
Can I make the face longer?
You can add extra plain rounds between Rounds 18 and 21 for a longer jaw. The pattern itself calls for exactly 4 rounds there, which gives the proportions in my photo.
Should I glue or sew the eyes and nose?
Glue is faster and holds well for a display piece. Sewing is the better choice if the skull will be handled a lot or given to someone who might play with it, since stitched pieces hold up longer.
How big does the finished skull turn out?
Mine sits comfortably in two hands. The pattern does not give a finished measurement, and the size will shift with your yarn and tension.





